Maintenance Care for HVAC and Plumbing in Zimmerman, MN, and Surrounding Areas
Tuneups
Just looking for a quick Tuneup to get your system ready for the season? See the information below on our comprehensive air conditioner and furnace tuneups! When you call, just mention tuneups to get on the schedule today!
21 Point Precision Air Conditioner Tuneup:
21 Point Precision Furnace Tuneup:
- Check Voltages
- Check Air Temperature Across Evaporator Coil
- Check Refrigerant Charge
- Check Superheat
- Lubricate any Moving Parts
- Check Evaporator Condition
- Check Condenser Coil Condition
- Check Filter
- Check and Adjust Thermostat
- Check All Wiring and Connections
- Check Condenser Temperature Rise
- Check Starting Contactor
- Check All Capacitors Microfared (MFD)
- Measure All Motor Amperages
- Check Operation of Unit Safety Controls
- Check Fan Blade for Cracks
- Check Condensate Drain or Pump
- Turn Exposed Dampers to Cooling (No Balancing)
- Check Fuse Disconnect
- Wax Top of Unit
- Check Condition of Ductwork
- Check and Adjust Thermostat
- Check and Adjust Safety Controls
- Clean Burners and Controls
- Clean and Adjust Pilot Assembly
- Check All Wiring and Connections
- Check for Gas Leaks at Furnace
- Lubricate All Moving Parts
- Clean Flame Sensors
- Check Condition of Filters
- Check Condition of Flue Pipe and Draft Diverter
- Check Fan Control
- Adjust Pressure Regulator
- Check Furnace for Carbon Monoxide
- Check Complete Furnace Cycle
- Make Any Necessary Recommendations
- Measure Oxygen Level
- Measure Carbon Dioxide Level
- Check the Draft (Flue Gasses Discharged from the Furnace)
- Check Temperature of the Stack (Flue Gasses)
- Check Temperature of Air Coming Out of Vents
- Check Efficiency Level (Can Adjust to Increase Efficiency)